About the product
SAFETY GUIDELINES:
1. Be sure that all machines have effective and properly working guards and covers, and that they are always in place when machines are operating.
2. Replace guards immediately after any repairs.
3. Do not attempt to oil, clean, adjust, or repair any machine while it is running. Stop the machine and lock the power switch in the "OFF" position.
4. Do not operate any machine unless authorized to do so by the instructor or under the instructor's supervision.
5. Do not set up or operate machinery when an instructor is not in the shop.
6. Even after the power is off, do not leave the machine until it has stopped running. Someone else may not notice that it is still in motion and be injured. Do not leave a machine until it has come to a complete stop.
7. Do not try to stop the machine with your hands or body.
8. Check tools before use to assure they are safe to use.
9. Always see that work and cutting tools on any machine are clamped securely before starting to work.
10. All setscrews should be of the flush or recessed type. If they are not, move with caution when near them. Projecting setscrews are very dangerous because they may catch on sleeves or clothing.
1. Be sure that all machines have effective and properly working guards and covers, and that they are always in place when machines are operating.
2. Replace guards immediately after any repairs.
3. Do not attempt to oil, clean, adjust, or repair any machine while it is running. Stop the machine and lock the power switch in the "OFF" position.
4. Do not operate any machine unless authorized to do so by the instructor or under the instructor's supervision.
5. Do not set up or operate machinery when an instructor is not in the shop.
6. Even after the power is off, do not leave the machine until it has stopped running. Someone else may not notice that it is still in motion and be injured. Do not leave a machine until it has come to a complete stop.
7. Do not try to stop the machine with your hands or body.
8. Check tools before use to assure they are safe to use.
9. Always see that work and cutting tools on any machine are clamped securely before starting to work.
10. All setscrews should be of the flush or recessed type. If they are not, move with caution when near them. Projecting setscrews are very dangerous because they may catch on sleeves or clothing.
Contact with supplier