About the product
The self-priming JSW pumps are designed to pump water even in cases where air is present. As a result of their reliability and the fact that they are easy to use, they are recommended for use in domestic, civil and industrial applications such as the distribution of water in combination with pressure sets, and for the irrigation of gardens and allotments, etc.
RANGE OF PERFORMANCE
Flow rate up to 50 l/min (3m3/h)
Head up to 47 m
LIMITS OF USE
Manometric suction lift up to 9 m
Liquid temperature up to + 40°C
Environment temperature up to + 40°C
INSTALLATION AND USE
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
JSW SELF-PRIMING PUMPS ARE DESIGNED FOR SUCTION LIFTS AND CAN BE POSITIONED ABOVE THE WATER SOURCE, INCLUDING APPLICATIONS WITH AIR ENTRAINED IN THE WATER. DUE TO THEIR RELIABILITY AND LOW MAINTENANCE, THEY ARE RECOMMENDED FOR RESIDENTIAL USE, INCLUDING WATER DISTRIBUTION (AS PART OF A PRESSURE SET), GARDEN IRRIGATION, ETC.
The pumps must be installed in enclosed places, or at least protected against inclement weather.
CONSTRUCTION CHARACTERISTICS
• PUMP BODY: cast iron, with threaded ports.
• BODY BACK-PLATE: stainless steel AISI 304.
• EJECTOR ASSEMBLY: technopolymer (approved for drinking water).
• IMPELLER: technopolymer up to 1 HP.
• MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
• MECHANICAL SEAL: ceramic - graphite -NBR.
• ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed
fan cooled (TEFC), suitable for continuous duty.
JSW: single-phase 115 V or 230 V - 60 Hz with capacitor and
thermal overload protector.
• INSULATION: class F.
• PROTECTION: IP 44.
• REGISTERED MODEL nº 72753
GUARANTEE 2 YEARS (Subject to our general terms of sale)
RANGE OF PERFORMANCE
Flow rate up to 50 l/min (3m3/h)
Head up to 47 m
LIMITS OF USE
Manometric suction lift up to 9 m
Liquid temperature up to + 40°C
Environment temperature up to + 40°C
INSTALLATION AND USE
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
JSW SELF-PRIMING PUMPS ARE DESIGNED FOR SUCTION LIFTS AND CAN BE POSITIONED ABOVE THE WATER SOURCE, INCLUDING APPLICATIONS WITH AIR ENTRAINED IN THE WATER. DUE TO THEIR RELIABILITY AND LOW MAINTENANCE, THEY ARE RECOMMENDED FOR RESIDENTIAL USE, INCLUDING WATER DISTRIBUTION (AS PART OF A PRESSURE SET), GARDEN IRRIGATION, ETC.
The pumps must be installed in enclosed places, or at least protected against inclement weather.
CONSTRUCTION CHARACTERISTICS
• PUMP BODY: cast iron, with threaded ports.
• BODY BACK-PLATE: stainless steel AISI 304.
• EJECTOR ASSEMBLY: technopolymer (approved for drinking water).
• IMPELLER: technopolymer up to 1 HP.
• MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
• MECHANICAL SEAL: ceramic - graphite -NBR.
• ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed
fan cooled (TEFC), suitable for continuous duty.
JSW: single-phase 115 V or 230 V - 60 Hz with capacitor and
thermal overload protector.
• INSULATION: class F.
• PROTECTION: IP 44.
• REGISTERED MODEL nº 72753
GUARANTEE 2 YEARS (Subject to our general terms of sale)
Price
25000
Contact with supplier
Company